I made a 2lb batch of tea tree milk soap on 2-3-14. Had it sit for 24 hours before removing from the silicone mold. When I started cutting I noticed the bottom right corner was a little crumbly. When I poured at trace, the lye water/coconut milk was at 105 and the oils were about 95. A few hours later the loaf was still hot. I used the green clay from [www.soap-making-resource.com]. The rest of the soap came out wonderful. Just that bottom right corner. I tried sending a picture but it wouldn't go through. Any thoughts?
Thanks,
Arlisha
|